| Machine-rocking pumps of balance
Pumping units are walking beam individual drive of oil-well sucker-rod pumps used during oil well operation. Pumping unit is manufactured in two versions:
..More |
| AzINMASH-80BF, AzINMASH-100BF and AzINMASH-125BF Mobile drilling rigs
Mobile drilling rigs are intended for oil and gas wells drilling and workover. The rigs are designed for use in macroclimate regions with temperate and cold climate. The basic delivery set of the rigs includes: hoisting unit, drilling floor, pipe racks, r..More |
| УП-50, AzINMASH-60BF (УП-60) and AzINMASH-80BF (УП-80) Hoisting units
Hoisting units УП-50, AzINMASH-60BF (УП-60) and AzINMASH-80BF (УП-80) are intended for drill string rotation, round-trip as well as making-up and uncoupling of drill pipes, oil-well tubing and sucker rods during oil and gas wells workover...More |
| AzINMASH-37BF and AzINMASH-40BF Hoisting units
Hoisting units AzINMASH-37BF and AzINMASH-40BF are intended for round trip operations as well as making-up and uncoupling of oil-well tubing and sucker rods during production maintenance of oil and gas wells. It is also used for sand-washing..More |
| Prospecting drilling rig УРБ-2.5A mounted on the truck chassis КАМАЗ
The rig is designed for fluid circulating drilling of geophysical and core wells to depth down to 200 m by rotary drill pipes of 60.3 mm and to depth down to 300 m by 50 mm drill pipes. It is also suitable for auger drilling of cluster wells. ..More |
| Special reducer Ц2НШ-560, Ц2НШ-750Б, Ц2НШ-450, Ц2НШ-315
Two stage Novikov's chevron spur gears are designed for pumping units and other mechanical drives relating to sucker-rod well pumps. Reduction gears are used in regions with temperate and cold macroclimate zones...More |
| Lifting winch ЛПР-60
It is designed for round trip operations in well servicing and completion of the oil and gas wells located in the sea, and is equipped with stationary derrick facilities...More |
| Workover rig УПТ-32
The rig is designed for round-trip operations during servicing and workover of oil and gas wells up to 2.400 m in depth. It is used in temperate climate area. This is a self-propelled unit mounted on the chassis of the crawler tractor T 170.00-1. ..More |
| Pipe carrier PV-204
Designed for the trasportation of pipes with a diameter of 530 up to 1420 mm, and with a length of 12 m, along various roads allowing traffic with an axial load of up to 85 kN ... ..More |
| Tallving systems
Travelling system is intended for round-trip operation, drilling pipe and casing string suspension during oil and gas well drilling. Travelling system includes crown block, traveling block and hook block.
Some systems have traveling block a..More |
| Steel gas bottles
Steel bottles are used as autonomic sources of natural gas for home and industrial needs, and also as feeders of automobilic power plants ...
..More |
| Bottle carrier MQBD-80-250
Bottle carrier MQBD-80-250 is a truck used for the trasportation of batches consisting of 27 and 50 litre bottles between gas filling and distribution stations ... ..More |
| Liquid gas tank truck
Tank truck is intended for liquid gas transportation in comparatively not short distance (up to 400-500 km) and for gas provision in filling stations. ..More |
| Mobile workshop
Mobile workshop is intended for carrying out filter's and recovery, mechanical, welding and gas cutting works in a short period of time. ..More |
| Hoisting winch LPT-8
The hoisting winch is designed for round trips during repair and completion of oil and gas wells equipped with stationary derricks and masts. It is used in temperate climate areas. ..More |
| Bearing units of rocking machine
Bearing units of rocking machine are the following:
- balancer bearing;
- cross arm bearing;
- connecting rod lower head bearing ... ..More |
| Heat exchanger
Heat exchangers are designed for heat delivery from one liquid phase to another and used by oil-processing and oil-chemical enterprises. Depending on the diameter and length of the pipes heat exchangers are issued in various types...More |
| Electric elevator EQ-30
Unified electric elevator, referred to as “Elevator” after a time, is made in Subsidiary Company “Baki Fahlasi” machine-building plant. It is designed for wheel set change of railway vehicles. During elevator operation safety requirements have to be in co..More |
| Trailer with carrying capacity 6 tn
Trailer is intended for carrying loads in couple with truck like KAMAZ of any modification.
The trailer is 2-axial, frame performed with front turning trolley.
The trailer is equipped with clearance lamps and brakes for all wheels.
..More |
| Hydraulic jack – 120
Hydraulic jack -120 is designed for the removing of pipes and drilling tools during downhole failure under the required load up to 120 ton...More |
| Jack -3
Jack-3 is a mechanical and electric screw jack for individual case. It is designed for locomotive engine lifting and wheel changing. ..More |
| Spider SQ 60-125
Spider is designed for holding suspended of casing column during running operation. The pipes are compressed by the use of three-slip hanger installed in spider body. ..More |
| Drive PM-0.3A
Drive PM-0.3A is used for pumping action in water well with depth up to 50 m...More |
| Geared motor
The geared motor is used as a drive for general machine-building purposes.
The reducer in the manufacture structure is a two-stepped, planetary type ... ..More |
| Manifolds
Manifolds are dessignet for gradeless regulation of backpressure on the formation while drilling mud substitution in developing hole .....More |
| Clamp 80-102
The given clamp consists of two parts and is designed for elimination of local defects of pipelines with a diameter 80-102 mm on oil, gas and water lines at operational pressure up to 0.8 MPa ... ..More |
| Valve KB3-8.5
The valve KB3-8.5 is a lock equipment which is aimed of preventing gas emissions from the bottle and also to make the cross-over of liquefied gas reaching the critical pressure ... ..More |
| Boring equipment
This equipment is intended for pipe offset to the customer not shutting off fluid flow under the high pressure in production lines.
Kinematics of the equipment is implemented in such way that a constant feed corresponds to a rotation period is independ..More |
| Mill
The mill with a horizontal axis of rotation is used for grinding corns flour or cereal ... ..More |
| Carriage for invalids
The carriages for invalids are manufactured in two types:
- carriage for invalids A-1
- carriage for invalids with manual drive A-2 ...
..More |
|
